Back to Home Page

Series 2000

Eurotherm Temperature Controllers

HOME
Representing the result of over 34 years of advanced design and applications experience in temperature and industrial control, Series 2000 is the most complete family of controllers and associated products available today.
2116 & 2132

2200 Series

2400 Series
2604 & 2704
Including a full range of temperature controllers, process controllers, ramp/soak programmers, indicators, alarm units, and solid state contactors, Series 2000 is available in a wide range of sizes with features designed to provide accurate, trouble-free performance well into the future.
2132 and 2116 Simple PID Controllers

Ideal for:

  • Small Ovens
  • Chillers
  • Sterilizers
  • Trace heating
  • Heat sealing

Available in compact 1/32 and 1/16 DIN panel sizes, the 2100 series uses advanced PID algorithms to give stable "straight line" temperature control. Self tuning is included to optimize the control performance without the need for specialized knowledge or training.

A universal input, employing patented Instant Accuracy™ technology, allows selection of nine internally stored thermocouple types and the Pt100 resistance thermometer. Other input linearizations may be factory downloaded. Linear inputs can be scaled to the desired display range. Two outputs are configurable for heating, cooling or alarms. Three internal alarm setpoints are provided, configurable as high, low or deviation alarms. Alarms can be "blocked" on start-up to prevent unnecessary operator alerts.

Heater failure can be detected when the controller is used with the TE10S Solid State Relay. Tactile buttons ensure positive operation.

Ramp-dwell programming:

Simple baking profiles can be programmed using the built in setpoint ramp generator and dwell timer.

Specifications:

Control modes: PID or On/Off

Supply voltages: 85-264Vac, 5.0watts maximum / 20-29Vac or dc, 5.0watts maximum

Operating ambient: 0-55°C, 0-90%RH non-condensing

Inputs: Nine standard thermocouple types. Pt100. 4-20mA linear. Custom input available

Output ratings: Relay: 2A, 264Vac resistive Logic: 9Vdc, 18mA

back to top

2216e, 2208e, and 2204e General Purpose PID Temperature Controllers

Ideal for:

  • Extrusion - with optimized fan, water or oil cooling
  • Ovens and furnaces
  • Lab applications

Available in 1/16, 1/8 and 1/4 DIN panel sizes the 2200e series are configurable for PID, On/off or motorized valve control - satisfying both electrical and gas heating applications. Self-tuning is included to optimize control performance. These units employ patented Instant Accuracy™ technology on scaleable universal inputs accepting nine standard thermocouple and RTD inputs, DC process inputs or downloadable custom inputs.

Modular heating and cooling outputs are provided, plus one or two alarm relay outputs. The 1/8 and 1/4 DIN units have two digital inputs to select auto/manual transfer, standby mode, second setpoint or alarm acknowledge. The 1/4 DIN model 2204e has an additional 10 amp high current output option.

Digital communications with Modbus® RTU or DeviceNet™ protocols are available for easy connection to PLC® or PC based supervisory control and data logging systems.

A simple ramp and hold profile can be programmed using the internal ramp generator and dwell timer.

Eliminate ammeters using PDSIO® current monitoring facility. Heater current may be displayed and open and short circuit faults detected and alarmed.

Specifications:

Control modes: PID or On/Off or motorized valve control

Supply voltages: 85-264Vac, 10.0watts maximum

Operating ambient: 0-55°C, 0-90%RH non-condensing

Inputs: Nine standard thermocouple types. Pt100. 4-20mA linear. Custom input available

Output ratings: Relay: 2A, 264Vac resistive Logic: 9Vdc, 18mA Triac: 1A, 264Vac resistive DC: Isolated 0-20mA, at 12Vdc

back to top
2416, 2408, and 2404 High Stability Temperature and Process Controller/Programmer

Ideal for:

  • Single and multi-zone ovens, furnaces and kilns
  • Environmental chambers
  • Simple ratio and cascade control

Available in 1/16, 1/8 and 1/4 DIN panel sizes, the 2400 series are high stability controllers with an extensive range of options. Either PID, on/off or motorized valve control can be configured, satisfying both electrical and gas heating applications. Dual PID settings, advanced "one shot" and continuously adaptive tuning are available to optimize control performance.

The controllers employ universal inputs with Instant Accuracy™ and accept a range of plug-in modules for heating, cooling, analog retransmission, second process value input and remote setpoint. High speed Modbus®, Profibus® and ASCII communications provide easy connection to PLC®, PC based supervisory control and data logging systems.

One, four or 20 setpoint programs can be stored with 16 ramp-dwell segments and three or eight event outputs.

Eliminate ammeters using PDSIO® current monitoring facility. Heater current may be displayed and open and short circuit faults detected.

Specifications:

Control modes: PID or On/Off or motorized valve control

Supply voltages: 85-264Vac, 15watts maximum / 20-29Vac/dc, 15watts maximum

Operating ambient: 0-55°C, 0-90%RH non-condensing

Inputs: Nine standard thermocouple types. Pt100. 4-20mA linear. Custom input available

Output ratings: Relay: 2A, 264Vac resistive Logic: 9Vdc, 18mA

Output ratings (cont): Triac: 1A 264Vac resistive DC: 0-20mA or 0-10Vdc configurable

back to top
2604, 2604f, 2704 and 2704f High Performance Multiloop Controller/Programmer

Ideal for:

  • Atmosphere heat treatment
  • Reliability test chambers
  • Composite curing autoclaves
  • Vacuum furnaces
  • Ceramic and brick kilns
  • Glass furnaces/forehearths
  • Melt pressure
  • One, two or three control loops

2604 and 2704 are high stability temperature and process controllers. The 2604 has a dual five digit display and a two line LCD panel. The 2704 has a high visibility graphical user interface, enabling many advanced features including PV/SP trending. Both units are available in a single, dual or triple loop format and employ universal inputs with Instant Accuracy™.

A setpoint programming option is available allowing storage of up to 50 programs, each program can profile up to three setpoints. Using internal Toolkit Blocks, including timers and totalizers, customized user configurations and special machine controllers can be created.

2604 and 2704 have fixed and modular I/O and can use the 2000 I/O expansion unit to provide further input and output connections.

I/O Expander

The Series 2000™ I/O is a DIN rail mounting digital I/O expansion unit. It is used in conjunction with the 2604 and 2704 controllers to allow the number of digital I/O points to be increased by a maximum of 20 inputs and 20 outputs.

Two product offerings are available allowing either 10 inputs/outputs or 20 inputs/outputs. Supply to the unit is 24Vac/dc. Communications between the Series 2000™ I/O and its host controller is performed serially via a proprietary two wire interface.

Specifications:

Dimensions (mm): 96W x 96H x 150D

Control modes: 3 Control Loops - PID,On/off and Motorized Valve, Cascade, Ratio & Override

Setpoint programmer: 50 Programs, 500 segments, 16 Event outputs

Supply voltages: 85-264Vac - 24Vac/dc

Special functions: Melt pressure control, Carbon potential, Humidity control and Trending control

Toolkit blocks: Analog and digital operations, Pattern generator, Pulse programmer, Timers and Totalizers

Communications: Modbus® and Profibus®

HOME
back to top
HOME | PRODUCTS | CONTACTS